Right Elevator

The right elevator was the hardest part to build so far. Now that I’m working on the left side things are going a lot better, and easier. Just for future reference, theseare things that I learned that makes it simpler:

  • Dimples on the skin to spar area are not nice and resulted in my worst looking rivets so far. For the second elevator I asked my wife to help by holding the skins while dimpling and results are really good.
  • It was hard to rivet the stiffeners and spars. I found that the easiest way was to open the skin at least 90 degrees, and hold it from the outside (it is not going to break). Once you do it that way, and have better dimples results are good.
  • Riveting the counterbalance ribs to the main spar is a lot easier when the skin is still open. I got all but two rivets on both skin to spar and skin to ribs done pretty easy.
  • Trailing edge came up pretty similar to the rudder. Nothing really bad, but not as good as I would like.

The elevators are pretty simple assemblies, but require a lot of attention to detail, and it is pretty easy to make mistakes. In the future I may re-do it, but overall I think is OK.

And…….

 

 

Felt pretty cool getting to test fit the elevator on the horizontal stabilizer. 🙂

IMG_7202.jpg

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s